Data Translation Firmenprofil

About the Company

 

At the end of 2015, the measurement technology specialist Data Translation Inc./Boston/USA was taken over by Measurement Computing (MCC), Norton/USA. Now the German branch of Data Translation has changed its name and since then operates under the name of Measurement Computing GmbH. In addition, a new internet presence was launched at www.mccdaq.de, optimally representing the two well-known measurement technology brands and the product range.
Users now find two of the most important measurement technology brands, including the corresponding support,
under one roof.
Here an overview about the Data Translation History:
2015 November: Measurement Computing (MCC) acquires Data Translation, strengthens position in Data Acquisition.
2015 DT9857E: 8- or 16-channel DAQ for sound & vibration measurement with 24 Bit IEPE sensor inputs.
DT7816/DT7837: Embedded ARM Data Acquisition with Linux platform.
2014 DT9844: 20-bit USB measurement device with 32 channels and 1 MHz sampling rate.
DT9829: multi-sensor USB measurement module connects various sensors directly.
2013 QuickDAQ: free data logger application for all Data Translation USB und Ethernet devices. FFT-based options for spectral and modal analysis.
2012 Portable USB module DT9838 for strain- and bridge-based sensors, powered over USB.
2011 DT9862: 10 MHz measurement devices, data continuously transferred to PC memory over USB2.0.
2010 DT9836S: USB device with 6x 800 kHz data rate, simultaneous data acquisition over USB2.0.
2008 Instrument class devices with Ethernet (LXI) interface for measurement of temperature and voltage up to 400V.
2007 MEASURpoint: galvanically isolated 48-channel temperature measurement instruments with data logger.
DT9837 series: USB-based 24-bit devices for sound & vibration measurement.
2006 High-speed simultaneous data sampling over USB: 225 kHz per channel with the DT9836-series.
2005 ECON series: low-cost USB measurement modules with built-in screw terminals.
2004 DT9834 series: 500 kHz USB2.0-based measurement devices with up to 32 channels and 4 analog outputs.
2003 DT9840 series: simultaneous measurements with DSP-based real-time OS and USB2.0.
1999 Data Translation enters the USB bus with the DT9800-series devices with up to 100 kHz sampling rate.
1998 DT300 is a series of low-cost, multi-function PCI cards with 12 or 16-bit resolution. 
1997 DT3010-series PCI measurement cards with 1.25 MHz sampling rate.
1995 Launch of the first PCI based Frame Grabber cards, called MACH-series.
1994 First multi-function PCI card for analog data acquisition.
1992 Data Translation introduced DT-Open Layers, the device driver architecture for Windows operating systems.
1990 Programmable data acquisition with the DT2831-series; ISA bus-based cards without potentiometers or jumpers.
1987 Data Translation GmbH founded in Bietigheim-Bissingen, Germany.
1985 High-speed data acquisition (250 kHz) with the DT2821-series and Dual-Channel DMA technology.
1983 World’s first multi-function card for PC-based measurements (DT2801).
Data Translation’s first Frame Grabber device for the PC (DT2803).
1976 First measurement cards for standard bus-systems, Multibus and Q-Bus.
1973 Company founded in Marlboro, Mass., USA by Fred Molinari.