DT9874 - MEASURpoint USB

Precision Measurement Instrument for Temperature (Thermocouples, RTDs) and Voltage

ISO-Channel™ Technology
MEASURpoint™ is an ultra-accurate instrument that allows any combination of temperature and voltage to be measured with a single software solution. Up to forty-eight configurable channels allow the ultimate flexibility with voltage, thermocouple, and RTD inputs. MEASURpoint incorporates ISO-Channel™ technology to eliminate any common mode noise and ground loop problem in any environmental conditions. MEASURpoint is available as an USB or Ethernet (LXI™ Class C compliant) instrument.
Each MEASURpoint instrument includes QuickDAQ, a ready-to-measure software package, which allows you to configure your instruments, acquire measurements from mutiple devices, display the data in both numerical and chart displays, log the data to disk, and open your recorded data in Excel.

MEASURpoint is available with 8, 16, 24, 32, 40, or 48 input channels.
These instruments are equipped with 8-channel plug-in measurement boards for thermocouples, platinum resistance thermometers, resistance, voltage, or current.
Simply choose the instrument according to the total number of input channels desired.
Add the appropriate number of plug-in measurement boards of your choice. These are already included in the system price displayed.

Precision Measurement Instrument for Temperature (Thermocouples, RTDs) and Voltage

Zoom image
  • any combination with 8-channel plug-in measurement boards for voltage, thermocouples, RTDs, resistance, or current input is possible
  • ISO-Channel™ - ±60V functional isolation (±500V peak withstand) channel to channel and to the host computer to protect signal integrity
  • Dedicated 24-bit, Delta-Sigma A/D converter for each input channel for simultaneous, high-resolution measurements
  • QuickDAQ data logger application and programming examples included
  • sampling rates up to 10 Hz per channel
  • common mode voltage range ±60V - for free floating measurements
  • Easy access jacks for quick wiring
  • Self-calibrating feature for "anytime" zero point calibration
  • 8 digital input lines up to 28VDC, galvanically isolated
  • 8 digital output lines, solid-state relays up to ±30V@400mA, galvanically isolated
  • sample digital input channels along with the analog channels
  • IVI-COM instrument driver for .NET, NI LabVIEW, VEE, MATLAB (32-bit versions only), LabWindows/CVI development
  • metal case 213x212x88 mm, mains power supply EP361 and USB cable included
Callback
Products Software Accessories Documents More Info Download

8-Channel Precise Measurement Instrument USBDT9874-08 MEASURpoint
8-Channel Precise Measurement Instrument USB

Please log in for pricing
  

Pricing

Add for comparison
  • equipped with one MEASURpoint plug-in measurement board of your choice

16-Channel Precise Measurement Instrument USBDT9874-16 MEASURpoint
16-Channel Precise Measurement Instrument USB

Please log in for pricing
  

Pricing

Add for comparison
  • equipped with two MEASURpoint plug-in measurement boards of your choice

24-Channel Precise Measurement Instrument USBDT9874-24 MEASURpoint
24-Channel Precise Measurement Instrument USB

Please log in for pricing
  

Pricing

Add for comparison
  • equipped with three MEASURpoint plug-in measurement boards of your choice

32-Channel Precise Measurement Instrument USBDT9874-32 MEASURpoint
32-Channel Precise Measurement Instrument USB

Please log in for pricing
  

Pricing

Add for comparison
  • equipped with four MEASURpoint plug-in measurement boards of your choice

40-Channel Precise Measurement Instrument USBDT9874-40 MEASURpoint
40-Channel Precise Measurement Instrument USB

Please log in for pricing
  

Pricing

Add for comparison
  • equipped with five MEASURpoint plug-in measurement boards of your choice

48-Channel Precise Measurement Instrument USBDT9874-48 MEASURpoint
48-Channel Precise Measurement Instrument USB

Please log in for pricing
  

Pricing

Add for comparison
  • equipped with six MEASURpoint plug-in measurement boards of your choice


8-Channel Plug-in Measurement Board for TCsDT9874-08T MEASURpoint Thermocouple
8-Channel Plug-in Measurement Board for TCs
Call for pricing 
Pricing

More info
  • Thermocouple types B, E, J, K, N, R, S, and T are supported directly
  • Software selectable TC type on a per channel basis
  • typical 0.0004°C resolution

8-Channel Plug-in Measurement Board for RTDsDT9874-08R MEASURpoint RTD
8-Channel Plug-in Measurement Board for RTDs
Call for pricing 
Pricing

More info
  • Platinum RTD types Pt100, Pt500, Pt1000 supported
  • 2, 3, or 4-wire configurations thru screw terminals
  • Resistance measurement up to 4250 Ohm

8-Channel Plug-in Measurement Board for VoltageDT9874-08V MEASURpoint Voltage
8-Channel Plug-in Measurement Board for Voltage
Call for pricing 
Pricing

More info
  • Input ranges: ±10V, ±60V
  • Software selectable ranges on a per channel basis
  • Maximum resolution of 1.2µV

Screw Terminal PanelSTP37
Screw Terminal Panel
Please log in for pricing
  

Pricing

More info
  • Interface via 37-way D-Sub connector.
  • 37 Screw Terminals for connection to field wiring.
  • For use with DT98xx-BNC, DT351, DT9824, and MEASURpoint

DIN Rail Mountable Screw Terminal PanelSTP37-DIN
DIN Rail Mountable Screw Terminal Panel
Please log in for pricing
  

Pricing

More info
  • Interface via 37-way D-Sub connector
  • 37 Screw Terminals for connection to field wiring
  • For use with DT98xx-BNC, DT351, MEASURpoint, DT9824

37-way cableEP333
37-way cable
Please log in for pricing
  

Pricing

More info
  • D-Sub connectors male/male
  • For use with DT98xx-BNC, MEASURpoint, DT9824, and DT351
  • Length: 2m

 EP373
Single Rack-Mount Kit for MEASURpoint
Please log in for pricing
  

Pricing

More info
  • 19" mounting kit for a single MEASURpoint instrument
  • for use with DT8874 or DT9874

 EP374
Dual Rack-Mount Kit for MEASURpoint
Please log in for pricing
  

Pricing

More info
  • 19" kit for mounting two MEASURpoint instruments side by side
  • for use with DT8874 or DT9874


MEASURpoint SoftwareTools and Data Logger for MEASURpoint
MEASURpoint Software
Free of charge
More info

  • IVI-COM Driver - works in any development environment that supports COM programming, including Visual Basic®, Visual C#® .NET, The MathWorks™ MATLAB®, Keysight VEE Pro, National Instruments' LabVIEW™ or LabWindows, and others.
  • Eureka Discovery Utility - locate all LXI (Ethernet) instruments
  • SCPI Support - includes SCPI Programmer's Manual and example programs written in Visual C# and Visual C++.

Free Data Logger Application - Upgradeable with FFT Analysis OptionsQuickDAQ
Free Data Logger Application - Upgradeable with FFT Analysis Options
Free of charge
More info

  • Two extensions add FFT analysis capabilities to the free base package.
  • QuickDAQ FFT Analysis Options allow serious sound & vibration analysis supporting modal analysis and ODS analysis methods.
  • Single-Channel and Dual-Channel (frequency response) FFT operations

Download our latest DASYLab drivers DASYLab
Download our latest DASYLab drivers
Call for pricing 
More info

  • Create complex applications in minimal time without programming
  • Lets you build worksheets using graphical functions
  • Implements real-time operations, including PID control

Datasheets
Show file Datasheet
User Manuals
Show file User's Manual
includes specifications
Show file User's Manual QuickDAQ
Images
Show file DT9874 custom enclosure
rack system with special connectors
Show file DT9874 custom enclosure
control cabinet application with special connectors
Show file DT9874 back panel
Show file Digital I/O via STP37
Show file QuickDAQ
Show file MEASURpoint Video
length 1:42
Drawings
Show file Mechanical Drawing
Application Notes
Show file More Information on IVI
Build you own applications based on Visual C++, Visual C# and Visual Basic .NET, Visual Basic 6.0, LabVIEW, LabWindows/CVI, MATLAB, Keysight VEE Pro.
White Papers
Show file Why ISO-Channel Technology is Your Best Return on Investment
When connecting signal sources it is important to eliminate the sources of error that can contribute to inaccuracies in your measurements. In most measurement instruments, this burden is on the customer. Instruments that use ISO-Channel ...
Show file ISO-Channel™ Protection
to eliminate any common mode noise and ground loop problem in any environmental conditions
More Downloads
Show file Driver for Instrument Control Toolbox in MATLAB/Simulink
Link to MATLAB Central File Exchange. Using the Instrument Control Toolbox from The MathWorks, you can access the functions of Data Translation's measurement instruments. Both USB and Ethernet (LXI) versions of the measurement instruments are supported. Download includes example application and manual.
Software Downloads
Show file LabVIEW 2010 VIs



Print PageBack To TopHelp DeskHome
Measurement Systems Ltd.UK Free Phone: 0800 048 1057Fax: +44 (0)1635 31023Email: info@measys.com
Measurement Computing GmbHPhone: +49-7142-9531-0Fax: +49-7142-9531-13Email: Info@MCCdaq.de