4-Channel Ethernet DAQ for IEPE Sensors

DT8837- 4-Channel Ethernet (LXI) instrument with IEPE Sensor Supply

The DT8837 is a highly accurate multifunction module that is ideal for sound and vibration measurements. All the I/O channels are completely isolated from each other and from the computer, allowing noise-free data to be sampled in tough industrial environments. Four 24-bit IEPE (ICP®) sensor inputs, a 24-bit D/A stimulus output, a 31-bit tachometer channel are synchronized to provide data streams that are matched in time for field or laboratory use.

DT8837- 4-Channel Ethernet (LXI) instrument with IEPE Sensor Supply

Zoom image
  • 4 simultaneous, 24-bit Delta-Sigma A/D channels for high resolution measurements, or use as 4 IEPE inputs for direct sensor connection
  • Sample rate up to 52.734 kHz, programmable
  • Input range of ±10V or ±1V, software selectable per channel
  • ISO-Channel™ provides ±500V galvanic isolation channel-to-channel for all I/O signals and grounds
  • One 24-bit D/A converter, ±10V, up to 52.734 kHz continuous waveform output
  • Readback channel to allow correlation of output stimulus with sampled input data
  • 4 digital outputs can switch up to ±30V @ 400 mA
  • Stack up to 16 modules for parallel operation of 64 channels (IEPE or voltage) via the Trigger Bus
  • Synchronization reference clock, ADC sync and trigger input/output via LXI Trigger Bus for synchronizing up to 16 instrument modules
  • Collection of free drivers and utilities, including QuickDAQ and a trial version of VIBpoint Framework
  • IVI-COM instrument driver for .NET, LabVIEW, VEE, MATLAB, LabWindows/CVI development
  • metal case, mains power supply EP361 included
Callback
Products Software Accessories Documents More Info Download Alternatives

DIN Rail Mountable Screw Terminal PanelSTP8837
DIN Rail Mountable Screw Terminal Panel
Please log in for pricing
  

Pricing

More info
  • cable EP378 included
  • DIN Rail Mount Kit included

LXI Wired Trigger Bus CableEP377
LXI Wired Trigger Bus Cable
Call for pricing 
Pricing

More info
  • synchronization cable
  • length 0.5m

 EP379
Dual Rack-Mount Kit
Please log in for pricing
  

Pricing

More info
  • 19" kit for mounting two instruments side by side
  • for DT8837, DT8824, DT9824, and DT9862

 EP380
Single Rack-Mount Kit
Please log in for pricing
  

Pricing

More info
  • 19" mounting kit for a single instrument
  • for DT8837, DT8824, DT9824, and DT9862

DC converter for all externally powered devicesDT Car Adaptor 12V/24V
DC converter for all externally powered devices
Please log in for pricing
  

Pricing

More info
  • Input range: 10.6 - 32VDC
  • Output: 5VDC (±1.7%) / 7A
  • Input plug: standard cigar lighter type


Dynamic Data Acquisition and Modal Analysis - for USB and Ethernet Data Acquisition Modules VIBpoint Framework
Dynamic Data Acquisition and Modal Analysis - for USB and Ethernet Data Acquisition Modules
from 1,125.00 GBP 
Excluding VAT 
More info

  • Discover and select available hardware: multiple DT9837 series, DT9847, DT9838, DT8837 (Ethernet), and DT9839
  • Configure all input channel settings, such as: enable state, clock rate, AC/DC coupling, gain, counter and tachometer edges, etc.
  • Load/Save multiple hardware configurations

Free Data Logger ApplicationQuickDAQ
Free Data Logger Application
Free of charge
More info

  • Ready-to-measure application software for acquisition, display, and logging
  • On each device acquire data from analog input, counter, tachometer, quadrature decoder, and digital input channels
  • FFT analysis options available

Datasheets
Show file Datasheet
User Manuals
Show file User's Manual
full specifications inside
Show file SCPI Manual
SCPI (Standard Commands for Programmable Instruments) is an universal programming language for electronic test and measurement instruments, based on the IEEE 488.1 and IEEE 488.2 standards. DT8837 comply with the SCPI language and implement the IEEE-488.2 STD status structure. You can issue SCPI commands over VISA or sockets.
Images
Show file PCB Layout
Show file LXI Trigger Bus
Block Diagram
Show file Block Diagram
Application Notes
Show file Using DT8837 with MATLAB
Using the Instrument Control Toolbox™ from The MathWorks™, you can access the functions of the DT8837.
Show file More Information on LXI
LXI is an instrumentation platform based on industry standard Ethernet technology designed to provide modularity, flexibility and performance to small- and medium-sized systems. ..
Show file More Information on IVI
Build you own applications based on Visual C++, Visual C# und Visual Basic .NET, Visual Basic 6.0, LabVIEW, LabWindows/CVI, MATLAB, Agilent VEE Pro, Measure Foundry.
White Papers
Show file Why ISO-Channel Technology is Your Best Return on Investment
When connecting signal sources it is important to eliminate the sources of error that can contribute to inaccuracies in your measurements. In most measurement instruments, this burden is on the customer. Instruments that use ISO-Channel ...
Show file ISO-Channel™ Protection
to eliminate any common mode noise and ground loop problem in any environmental conditions
More Downloads
Show file Driver for Instrument Control Toolbox in MATLAB
Using the Instrument Control Toolbox from The MathWorks, you can access the functions of Data Translation's instrument modules. The Instrument Control Toolbox communicates with DT instruments through a MATLAB driver to the instruments IVI-COM driver.
Software Downloads
Show file DT8837 Driver Download (217 MB)
- Trial version of VIBpoint Framework
- Includes the DT8837 IVI-COM drivers
Show file DT8837 Support Software (19 MB)
- Eureka Discovery Utility
- SCPI Support (Manual and Examples)
- Calibration Utility
These products may better fit to your requirements
DT9837 Series - 4-Channel High Performance Data Acquisition for Sound and Vibration Measurements 4-Channel USB Data Acquisition with IEPE
DT9837 series - USB modules

Product overview
Show file Simultaneous Data Acquisition Overview



Print PageBack To TopHelp DeskHome
Data Translation UKPhone: +44-1256 33 33 30Fax: +44-1256 33 33 88Email: Info@DataTranslation.co.uk